Other Systems

1. Introduction
   The BBR CONA is a further development of the CONA Compact system using seven-wire prestressing strands.
   
   
2. Tendon Sizes
   In accordance with the German Approval the standard tendons consist of 4, 7, 12, 15, 19 and 31 dia. 0,6” strands. Other tendon sizes can be executed by omitting one or more strands in a standard tendon
   
   
3. Post-tensioning System
   Active and passive anchorages have been tested and are available.
   
   
4. Download
   The following download is available:
   German Approval “BBR CONA Zulassung” PDF file (767 kB)

1. Introduction
   The BBR CONA Compact is a further development of the CONA Multi system using seven-wire prestressing strands.
   
   
   
2. Tendon Sizes
   The standard tendons are composed of 7, 12, 19, 31 and 42 dia. 0,5” strands and alternatively 4, 7, 12, 15, 19, 22, 24, 25, 27, 31 and 42 dia. 0,6” strands can be installed. Other tendon sizes can be obtained by omitting one or more strands in a standard tendon.
   
   
   
3. Post-tensioning System
   The available anchorages are the active and passive anchorages and the fixed couplers type K (with overlap) and  type GH (with sleeve).
   
   
   
4. Downloads
   The following downloads are available:
   “BBR CONA Compact Brochure (low resolution)” PDF file (978 kB)
   French Approval “NOTICE TECHNIQUE - BBR CONA COMPACT” PDF file (4.9 MB)

1. Introduction
   The BBR CONA Multi is the first development of a strand system using seven-wire prestressing strands.
   
   
   
2. Tendon Sizes
   The standard tendons consist of 7, 12, 19, 31, 42 and 61 dia. 0,5” strands and alternatively 4, 7, 12, 19, 31 and 42 dia. 0,6” strands can be executed. Other tendon sizes can be obtained by omitting one or more strands in a standard tendon.
   
   
   
3. Post-tensioning System
   The available anchorages are the active and passive anchorages, the fixed coupler type K (with sleeve) and the movable coupler type KC (also with sleeve).
   
   
   
4. Downloads
   The following downloads are available:
   “BBR CONA Multi Brochure (low resolution)” PDF file (592 kB)

1. Introduction
   The VT F100 and VT 140/150 are strand type post-tensioning systems.
   
   
   
2. Tendon Sizes
   The standard tendons are composed of 1, 4, 6, 12, 16 and 20 dia. 0,5” strands. Alternatively they consist of 1, 4, 6, 7, 8, 12, 15 and 19 dia. 0,6” strands. Other tendon sizes can be executed by omitting one or more strands in a standard tendon.
   
   
   
3. Post-tensioning System
   The available anchorages are the active and passive anchorages, the fixed and the movable couplers (coupled by a rod, or a sleeve, or with overlap).
   
   
   
4. Downloads
   The following downloads are available:
   Austrian Approval “LITZENSPANNVERFAHREN VT F100” PDF file (2.86 MB)
   Austrian Approval “LITZENSPANNVERFAHREN VT 140/150” PDF file (1.58 MB)

1. Introduction
   The BBR FLAT is a bonded post-tensioning system using seven-wire prestressing strands and is particularly suitable for thin construction elements.
   
   
   
2. Tendon Sizes
   The standard tendons consist of 4 dia. 0,5” strands or alternatively of 4 dia. 0,6” strands.
   
   
   
3. Post-tensioning System
   The available anchorages are the active and passive anchorages.

1. Introduction
   The BBR CONA Single with monostrands is used where small post-tensioning units are required. For unbonded tendons the strand is coated with a special protective grease and encased in a plastic conduit. In case of bonded tendons, a corrugated metal or plastic sheath is installed, which is cement grouted after the stressing operations.
   
   
2. Tendon Sizes
   The standard tendons consist of one dia. 0,5” or 0,6” strand.
   
   
3. Post-tensioning System
   The available anchorages are the active and passive anchorages and the intermediate anchorages with continuous strand or with coupler sleeve.
   
   
4. Downloads
   The following downloads are available:
   “BBR CONA Single Brochure (low resolution)” PDF file (1.03 MB)
   German Approval “Spannverfahren CONA-Single Litzenspannglied ohne Verbund” PDF file (1.82 MB)

1. Introduction
   The BBR CONA External is a further development of the CONA Compact system using seven-wire prestressing strands and is particularly suitable for unbonded external tendons.
   
   
2. Tendon Sizes
   The standard tendons are composed of 7, 12, 19, and 31 dia. 0,6” strands. Other tendon sizes can be obtained by omitting one or more strands in a standard tendon.
   
   
3. Post-tensioning System
   The available anchorages are the active and passive anchorages and the tendons can be executed as Basic Types (non-replaceable) or as Replaceable Types.
   
   
4. Download
   The following download is available:
   “Cables for External Prestressing” PDF file (5.62 MB)

To Top | Back